Provision For Redundancy; Provision The Ds3 Unchannelized Efm 4-Port Line Module; Provision The Ds3 Unchannelized Efm 4-Port Line Module Administration Status; Table J-3. Ds3 Unchannelized Efm 4-Port Module Administration States - ADTRAN Total Access 5000 Deployment Manual

Total Access 5000 Business Services Deployment Guide

Provision for Redundancy

To provision for redundancy, complete the following:
NOTE
To make the GE 4‐Port Line Module in the odd slot the active module,
provision it first.
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, type redundancy <shelf/slot> . and press
3. From the Redundancy Configuration prompt, type no shutdown , and press E
NOTE
Redundancy is not fully enabled until the even slot is also In Service.
4. Repeat steps 2 and 3 for the GE 4‐Port Line Module in the even slot.

Provision the DS3 Unchannelized EFM 4-Port Line Module

This subsection details the following information:
• Provision the DS3 Unchannelized EFM 4‐Port Line Module
• Provision the Uplink Identifer
• Provision the Timing Source
Provision the DS3 Unchannelized EFM 4-Port Line Module
Administration Status
Table J‐3 displays the three administration states and shows the equivalent Service State from
prior releases.
Command
no shutdown
shutdown maintenance
shutdown
To set the module administration state, complete the following:
J-4
bal Configuration prompt.
E
NTER .

Table J-3. DS3 Unchannelized EFM 4-Port Module Administration States

Previous Description
In Service
In the
passes and alarms are generated.
Out of Service, Main‐
In the
tenance
state, traffic passes but no alarms are
generated.
Out of Service, Unas‐
In the
signed passes and no alarms are generated.
to access the Glo‐
NTER
.
NTER
no shutdown
state, traffic
shutdown maintenance
shutdown
state, no traffic
65K510DEP08-1A