Accounting Example; Configure Local User Accounts; Create A New User Account; Modify An Existing User Account - ADTRAN Total Access 5000 Deployment Manual

Total Access 5000 Business Services Deployment Guide

Accounting Example

In the following example, level 1 and 15 command accounting is enabled.

Configure Local User Accounts

This section details the following information:
• Create a new user account
• Modify an existing user account
• Delete an existing user account
• Configure the password complexity

Create a New User Account

To create a new local user to the Total Access 5000, complete the following procedure:
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, type security , and press E
3. From the Security Configuration prompt, type username WORD , and press E
4. From the User Configuration prompt, type password , and press E
5. From the Password Entry prompt, type the password for the user, and press E
6. From the User Configuration prompt, type privilege [admin|config|read-
7. From the User Configuration prompt, type no disable to enable the username.
8. Type end , and press E

Modify an Existing User Account

To modify an existing user account on the Total Access 5000, complete the following
procedure:
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, type security , and press E
3. From the Security Configuration prompt, type username WORD , and press E
3-24
TA5000#configure terminal
TA5000(config)#aaa accounting commands 1 default stop-only group
tacacs+
TA5000(config)#aaa accounting commands 15 default stop-only group
tacacs+
bal Configuration prompt.
Security Configuration prompt.
a new user and access the User Configuration prompt.
Password Entry prompt.
only|read-write|test]
The default value when a new user is created is read‐only.
NTER
bal Configuration prompt.
Security Configuration prompt.
an existing user account and access the User Configuration prompt.
, and press E
to set the user privilege level.
NTER
to return to the Enable prompt.
NTER to access the Glo‐
NTER to access the
NTER to create
NTER to access the
NTER .
NTER to access the Glo‐
NTER to access the
NTER to access
65K510DEP08-1A