Total Access 5000 Business Services Deployment Guide
Central Office Terminal (COT) Provisioning
To provision the COT Node, complete the following:
• Provision the GE 4‐Port Line Module
• Provision the DS3 Unchanelized EFM 4‐Port Line Module
• Provision the T1 8‐Port Line Module
Provision the GE 4-Port Line Module
This subsection details the following information:
• Provision the GE 4‐Port Line Module Service State
• Provision the Network Ports
• Provision the Ethernet Star
• Provision for Redundancy
Provision the GE 4-Port Line Module Administration Status
Table J‐2 displays the three administration states and shows the equivalent Service State from
prior releases.
Command
no shutdown
shutdown maintenance
shutdown
To set the module administration state, complete the following:
1. From the Total Access 5000 Main menu, select System CLI , and press E
2. From the CLI menu, select CLI Command Entry , and press E
3. Select Y to enter the CLI command interface.
4. Log in again using the default ADMIN and PASSWORD options. The CLI prompt is
J-2
For more information, refer to "Provision the GE 4‐Port Line Module" on page J‐2.
For more information, refer to "Provision the DS3 Unchannelized EFM 4‐Port Line
Module" on page J‐4.
For more information, refer to "Provision the T1 8‐Port Line Module" on page J‐6.
Table J-2. GE 4-Port Line Module Administration States
The following response id displayed:
Use EXIT to exit CLI session.
displayed.
Previous
Description
In Service
In the
passes and alarms are generated.
Out of Service, Main‐
In the
tenance
state, traffic passes but no alarms are
generated.
Out of Service, Unas‐
In the
signed
passes and no alarms are generated.
no shutdown
state, traffic
shutdown maintenance
shutdown
state, no traffic
NTER
.
NTER
.
65K510DEP08-1A