Provisioning Steps; Table 5-7. Ppp Group Connecting Variables - ADTRAN Total Access 5000 Deployment Manual

Total Access 5000 Business Services Deployment Guide

Provisioning Steps

To create the EVC map on the Total Access 5000, complete the following steps:
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, type evc-map WORD <shelf/slot> , and press
NOTE
If creating a name with spaces, quotes must be used. For example, evc-map
"test map" 1/21
3. From the EVC Map Interface Configuration prompt, type connect evc WORD , and press
4. From the EVC Map Interface Configuration prompt, type connect uni ppp-group
Syntax
shelf
slot
group
5. From the EVC Map Interface Configuration prompt, type match dscp <0-63> , and
NOTE
• Multiple DSCP values can be listed, so that several maps can be mapped to
a MEN priority value in one step rather than several. For example, the
command, match dscp 5,12,24-37 , would be valid
• Provisioning of the DSCP matching criteria is optional. If a DSCP matching
criteria is not specified for an EVC map, then all traffic coming from the
PPP group matches the given EVC map, and that map is used instead. If,
for a particular PPP group, there are maps that specify the DSCP and one
that does not, the EVC map without a DSCP specifier receives any traffic
that does not match the other EVC maps
• If DSCP traffic received from the customer that does not match a
configured map, it is still passed onto the EVC VLAN, with priority zero.
6. From the EVC Map Interface Configuration prompt, type men-pri <0-7> , and press
5-16
bal Configuration prompt.
E
to create an EVC map in the specified shelf and slot, where WORD is the name of
NTER
the new EVC map.
.
E
NTER to connect the EVC map to the EVC, where WORD is the alias of the EVC.
, and press E
<shelf/slot/group>
Table 5‐7 displays the list of variables for connecting the PPP group.

Table 5-7. PPP Group Connecting Variables

press E
NTER .
The match dscp <0‐63> command specifies the DSCP to match for traffic received from
the customer (PPP group).
E
NTER .
NTER to connect the EVC map to the PPP group.
Description
Enter the shelf number. If provisioning a single‐node configuration,
enter 1.
Enter the slot number of the DS3 module.
Enter the a unique group number of the new PPP group.
NTER to access the Glo‐
65K510DEP08-1A