Table of Contents
Advertisement
Unit Installation
Getting Started
The 10/100BaseT Ethernet interface MUST NOT be metallically connected to
interfaces which connect to the Outside Plant or its wiring. This interface is designed
for use as an intrabuilding interface only. The addition of primary protectors is not
sufficient protection in order to connect this interface metallically to OSP wiring.
Connect to the NetVanta 340
1. Connect the NetVanta 340 ETHERNET interface to the PC using the appropriate Ethernet cable.
2. Supply power to the PC and the NetVanta 340 and begin the operating system boot up process.
During boot up, the PC obtains an IP address from the NetVanta 340 DHCP server. By default,
both the DHCP and HTTP servers are enabled. The default IP address is 10.10.10.1.
3. Open your internet browser and enter 10.10.10.1. in the URL field. The NetVanta 340 login
window appears.
4. Enter the default username (admin) and password (adtran), and click the OK button.
For security purposes, you should set up an admin password immediately. Use the
Passwords
5. By default, the NetVanta 340 comes with an ADSL and an ATM (Asynchronous Transfer Mode)
port already configured and enabled. The service provider should provide a PVC (VPI / VCI)
number which will be used to configure the ATM PVC.
Configure the ATM PVC
1. Click on the
Getting Started
2. Click on
Step 1 - Configure the Public Interface
PVC page.
3. Fill in the PVC number and select an
IP routing
is chosen, you will need to enter an IP address.
4. Click
. If PPP or PPPoE is selected as the
Apply
after clicking
Apply
passwords, and the
Negotiated
. Click
24
page of the Web GUI to change this password.
link under the
Interface Mode
. Here you will need to select the type of authentication needed, authentication
. In most cases you will want the
Address Type
Apply
when all the information is complete.
© 2004 ADTRAN, Inc.
NetVanta 340 Series Hardware Installation Guide
System
menu. This will bring up a side bar page.
at the top of the side bar page to open the ATM
. This is usually PPP or PPPoE; however, if
, you will be taken to the PPP page
Interface Mode
to be
Address Type
61200422L1-34A
Advertisement
Table of Contents
