Set The Tid - ADTRAN Total Access 5000 Deployment Manual

Total Access 5000 Business Services Deployment Guide
5. If desired, type snmp-server chassis-id-tid-sync to enable TID/SysName Sync,
NOTE
• The TID/SysName Sync provisioning is a setting that forces the TL1 TID
and SNMP System Name to be identical. If Sync is enabled, a change to one
of these settings forces the other to be changed as well.
• If the TID/SysName Sync is enabled, it converts the system name to all caps
and the only special character allowed is "_".

Set the TID

To set the Target Identifier (TID), complete the following procedure:
1. From the Global Configuration prompt, type tl1 , and press E
2. From the TL1 Configuration prompt, type tid WORD , and press E
NOTE
The TID name is entered using up to 20 alpha‐numeric characters beginning
with a letter character. The TID name must be unique and not duplicate the
Network Name.
3. Type end , and press E
3-4
and press E
.
NTER
figuration prompt.
NTER
to return to the Enable prompt.
NTER to access the TL1 Con‐
NTER to set the TID.
65K510DEP08-1A