Figure M-4. Current West Protection Menu; Figure M-5. Protection Command: Manual - ADTRAN Total Access 5000 Deployment Manual

2. Once the Manual Switch completes, go back to the Idle condition. Allow 10 seconds to
3. Log on to Node B and perform a Forced Switch on the West Interface.
4. Disconnect the fibers between Node B and C.
65K510DEP08-1A
Appendix M, Add/Remove Node from RPR Ring - Add Node to a Complete Ring
TID: TA5000
Unacknowledged Alarms: None
Current West Protection: Idle

Figure M-4. Current West Protection Menu

Figure M‐5 displays an example of a Manual Switch.
TID: TA5000
Unacknowledged Alarms: None
1. Keepalive Timeout (ms)
2. Wait to Restore Time (s)
3. Protection Holdoff Time (ms): 0
4. Protection Command
5. Fairness Weight
6. Reset Watermarks

Figure M-5. Protection Command: Manual

pass, and perform a Forced Switch on the East Interface.
Total Access 5000 System
1. Force Switch
2. Manual Switch
3. Idle
Selection : 2
W-West E-East
'?' - System Help Screen
Total Access 5000 System
RPR Provisioning
: 5
: 10
West
: Manual Switch
: 1
Selection :
'?' - System Help Screen
MM/DD/YY hh:mm
Node: 1
MM/DD/YY hh:mm
Node: 1
East
0
Idle
1
M-5