Tools Required For Chassis Installation; Tools Required For Chassis Installation - ADTRAN Total Access 5000 Deployment Manual

Total Access 5000 Business Services Deployment Guide

Tools Required for Chassis Installation

The tools required to install the chassis are as follows:
• A #2 phillips‐head screwdriver
• Crimping tool for power lugs
• Wire strippers
• Wire‐wrap tool
• Side cutters
• Torque wrench with a range from 2 to 37 inch/pounds
• Ohmmeter
The items required to install the chassis are as follows:
• Screws for mounting the chassis to the Central Office (CO) racks
• Insulated wire, stranded, copper, (2 AWG to 6 AWG) that is at least equal to the same size
• Data cables terminated for the Total Access 5000 50‐pin or 64‐pin connections
• Insulated wire for power connections
!
WARNING
To prevent electrical shock, do not install equipment in a wet location or
during a lightning storm.
NOTICE
Electrostatic Discharge (ESD) can damage electronic modules. Before
handling modules, wear an antistatic discharge wrist strap to prevent
damage to electronic components. Place modules in antistatic packing
material when transporting or storing. When working on modules, always
place them on an approved antistatic mat that is electrically grounded.
2-2
of the power wire for grounding the chassis to the frame
65K510DEP08-1A