Provision The Ds3 Unchannelized Efm 4-Port Line Module; Provision The Ds3 Unchannelized Efm 4-Port Line Module Administration Status; Table J-6. Ds3 Unchannelized Efm 4-Port Module Administration States - ADTRAN Total Access 5000 Deployment Manual

4. Repeat steps 2 and 3 for the GE 4‐Port Line Module in the even slot.

Provision the DS3 Unchannelized EFM 4-Port Line Module

This subsection details the following information:
• Provision the DS3 Unchannelized EFM 4‐Port Line Module
• Provision the Uplink Identifer
• Provision the Timing Source
Provision the DS3 Unchannelized EFM 4-Port Line Module
Administration Status
Table J‐3 displays the three administration states and shows the equivalent Service State from
prior releases.
Command
no shutdown
shutdown maintenance
shutdown
To set the module administration state, complete the following:
1. From the Total Access 5000 Main menu, select System CLI , and press E
2. From the CLI menu, select CLI Command Entry , and press E
3. Select Y to enter the CLI command interface.
4. Log in again using the default ADMIN and PASSWORD options. The CLI prompt is
5. Type enable , and press E
6. From the Enable prompt, type configure terminal , and press E
65K510DEP08-1A

Table J-6. DS3 Unchannelized EFM 4-Port Module Administration States

The following response id displayed:
Use EXIT to exit CLI session.
displayed.
Global Configuration prompt.
Appendix J, GigE Star Provisioning - Remote Terminal (RT) Provisioning
Previous
In Service
Out of Service, Main‐
tenance
Out of Service, Unas‐
signed
NTER to enable the privileged commands.
Description
no shutdown
In the state, traffic
passes and alarms are generated.
shutdown maintenance
In the
state, traffic passes but no alarms are
generated.
shutdown
In the state, no traffic
passes and no alarms are generated.
.
NTER
NTER .
NTER . to access the
J-13