Ppp Group Example - ADTRAN Total Access 5000 Deployment Manual

Hide thumbs Also See for Total Access 5000:
Table of Contents

Advertisement

Total Access 5000 Business Services Deployment Guide

PPP Group Example

The following example creates a PPP group that includes slot 3, DS3 #2, and DS1 port 17. It 
assigns the subtended device of the IP address, 192.168.1.2, with a default gateway of 
192.168.1.254. It also sets the primary DNS as 192.167.2.13. This example is for the CH DS3 
PPP/MLPPP 3‐Port Line Module.
PPP Group 1/3/5 {} is ENABLED and DOWN
Interface Status:
Active Slot
Available Links
LCP State
NCP State
IP Address Configuration
Multilink
Local/Remote MRU
Running Totals:
Tx L3 Packets
Tx Packets
Tx Octets
Tx Discard Count
Tx Error Count
Rx L3 Packets
Rx Packets
Rx Octets
Rx Discard Count
Rx Error Count
TA5000#
5-10
Peer IP Address
Peer IP Gateway
Peer IP Primary DNS
Peer IP Secondary DNS
Number of Active Links
Fragment
Local/Remote MRRU
N2F-F2N Small Seq #s
Local ED
Remote ED
: 4196
: 16346
: 411059
: 0
: 0
: 4282
: 16431
: 405541
: 8
: 0
: 3
: 3/2:17
: REQSENT
: INITIAL
: Static IP
: 192.168.1.2
: 192.168.1.254
: 192.167.2.13
: 0.0.0.0
: rejected
: 1
: rejected
: 0/0
: rejected-rejected
: Not Available
: Not Available
: 1500/1500
65K510DEP08-1A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ta 5000

Table of Contents