Total Access 5000 Business Services Deployment Guide
Total Access 5000 Provisioning Defaults
To view the current provisioning settings, complete the following steps:
1. From the Total Access 5000 Root prompt, type enable to access the Enable prompt, and
2. From the Enable prompt, type show run config to display the list of current
3. Refer to the tables below to view the factory provisioning defaults.
Provisioning Option
aaa accounting commands 1 default none
aaa accounting commands 15 default none
aaa accounting exec
aaa accounting update periodic
aaa authentication eep
aaa authentication login
aaa authorization commands 1 default none
aaa authorization commands 15 default none
aaa authorization config‐command
aaa authorization exec
auto‐provisioning controller
auto‐provisioning module
Provisioning Option
alarm enable complete
alarm enable failed
alarm enable file bad
alarm enable file changed
alarm enable software‐version‐error
alarm enable started
alarm enable unknown‐module
alarm level software‐version‐error
mode
refresh‐interval
I-2
press E
NTER
.
provisioning settings, and press E
Table I-2. Authentication, Authorization, and Accounting (AAA) Defaults
.
NTER
Default Setting
None
None
None
5
Enabled
Local
None
None
Disabled
None
Enabled
Enabled
Table I-3. Auto-Upgrade Defaults
Default Setting
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
Enabled
Minor
Manual
0
65K510DEP08-1A