Disable Unused Netvanta 8044 Interfaces; Disable Unused Netvanta 8044 Interfaces; Disable The Gigabit-Ethernet Interface; Clear The Alarm Log - ADTRAN Total Access 5000 Deployment Manual

Total Access 5000 Business Services Deployment Guide

Disable Unused NetVanta 8044 Interfaces

The NetVanta 8044 declares alarms for all unused Gigabit‐Ethernet interfaces. To clear these
alarms once the 8044 is turned up, the appropriate interfaces must be shut down.
This subsection details the following information
• Disable the Gigabit‐Ethernet interface
• Clear the alarm log

Disable the Gigabit-Ethernet Interface

To disable the Gigabit‐Ethernet port, complete the following procedure:
NOTE
A port must be placed out of service, regardless of SFP presence, to remove
the alarms.
If the port is enabled and no SFP is present, there will be an alarm for no SFP
being present.
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, access the Gigabit‐Ethernet Port Configuration
3. Disable the Gigabit‐Ethernet port down by typing shutdown , and press E
The Gigabit‐Ethernet link down alarm should now be cleared in the alarm log, and the portʹs
LED should be off.

Clear the Alarm Log

Before clearing the Alarm Log, the alarms must first be acknowledged.
To clear the Alarm Log, complete the following procedure:
1. From the Enable prompt, type force alarm acknowledge , and press E
2. Clear the alarm log by typing force alarm clear and pressing E
3. Verify there are no alarms by typing show alarm log and pressing E

Save the NetVanta 8044 Provisioning

After any changes are made, whether new services or port configuration, the user should
always save provisioning to non‐volatile memory in order to maintain those attributes during
power loss. From the Enable prompt, save provisioning by typing copy running-configu-
ration startup-configuration
The save completes within 5‐seconds and returns to the user prompt immediately. Once the
user prompt returns, the NetVanta has saved its configuration to non‐volatile memory.
7-18
bal Configuration prompt.
prompt by typing interface gigabit-ethernet 1/0/1 , and press E
, and press E
NTER .
NTER to access the Glo‐
NTER .
NTER .
NTER .
NTER .
NTER .
65K510DEP08-1A