Total Access 5000 Business Services Deployment Guide
Disable Network Interfaces
To disable any unused SM Gigabit‐Ethernet ports:
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, type interface gigabit-ethernet
3. From the Gigabit Ethernet Interface Configuration prompt, type shutdown , and press
4. Repeat steps 2 to 3 to disable additional gigabit‐ethernet interfaces
5. From the Gigabit Ethernet Interface Configuration prompt, type end , and press E
A-8
bal Configuration prompt.
, and press E
<shelf/slot/port>
E
to set the interface to Out of Service, Unassigned.
NTER
return to the Enable prompt.
to access the lag group configuration prompt.
NTER
NTER
to access the Glo‐
NTER
to
65K510DEP08-1A