ADTRAN Total Access 5000 Deployment Manual page 98

Total Access 5000 Business Services Deployment Guide
2. From the Global Configuration prompt, type tacacs-server host A.B.C.D key
NOTE
• Any combination of shared_key, port_num, and timeout_secs can be
specified, including listing none of them at all. Only the parameters
specified will be changed from the global TACACS+ default values (or
whatever their current values are).
• If the IP address is that of a new TACACS+ server, a new server will be
added to the TACACS+ server list. All server parameters will be defaulted
to the global TACACS+ value, and then overwritten with whichever
parameters are specified after the IP address. If the server is an existing
server, the parameters specified will be modified.
3. Type tacacs-server host A.B.C.D name WORD , and press E
4. To set the server sequence number (or priority), type tacacs-server host A.B.C.D
NOTE
Only 0 can have mulitple servers. Sequence numbers 1 ‐ 4 can only have one
server for each sequence number at any given time. To swap the sequence
number of two servers, temporarily set the sequence number of one server to
0, change the other server's sequence number, and then change the sequence
number of the first server from 0 to the new desired number.
5. To delete a TACACS+ server from the server list, type no tacacs-server host
3-20
WORD port <1-65535> timeout <1-30>
server.
server hostname.
sequence-number <0-4>
(secondary server), and so on up to 4.
If the sequence number is not specified, the system automatically orders the servers
(from primary on down) as they are entered, so the specification of the sequence number
is only necessary if the priority order needs to be changed. A server with a sequence
number of zero is effectively disabled.
, and press E
A.B.C.D NTER
, and press E
, and press E
, where priority = 1 (primary server), 2,
NTER
.
to configure the TACACS+
NTER
NTER to set the TACACS+
65K510DEP08-1A