Total Access 5000 Business Services Deployment Guide
Log On to the NetVanta 838
Access the management and provisioning features for the NetVanta 838 products by
Command Line Interface (CLI) using a standard DB‐9 serial cable to connect to the console
port located on the unit. The CLI may also be accessed via Telnet over the Inband
Management VLAN.
CRAFT Port Login
To establish CLI communication with the product, complete the following procedure:
1. Connect to the craft interface using a VT100 terminal or PC with VT100 emulation soft‐
2. Once connected, press E
NOTE
The account name and password are case sensitive. Default accounts are
ADMIN, READONLY, READWRITE, and TEST. The default password for
each of these accounts is PASSWORD. The privilege to change passwords,
account names, and privileges are included in the ADMIN account.
Remote Access Login
To remotely access the NetVanta 838, open a telnet session to the IP address configured in the
bridge group.
4-20
ware configured with the following parameters:
• Any baud rate from the list of 9600, 19200, 38400, 57600, or 115200
• 8 data bits
• No parity
• 1 stop bit
• No flow control
NTER
several times to access the CLI.
65K510DEP08-1A