DRUM UNIT
3.6.7 QUENCHING LAMP
OPC drum (
3.6.5)
[A]: Quenching lamp ( x 1)
• At the center, push back the hook to release the quenching lamp.
NOTE: Use only a blower brush to clean the quenching lamp.
3.6.8 DRUM POTENTIAL SENSOR
OPC drum (
3.6.5)
[A]: Drum potential sensor ( x 2, x 1)
NOTE: If Auto Process Control is set to "on" (SP3901), perform SP2962
(Adjustment of Drum Conditions) after replacing the drum potential
sensor.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[A]
CÓPIA NÃO CONTROLADA
B246R950.WMF
[A]
B246R951.WMF
3-40
SM