2Wd Drive Manifold Components - Genie Z-60/34 Service Manual

Section 4 • Repair Procedures
MANIFOLDS
8-9

2WD Drive Manifold Components

The drive manifold is mounted inside the drive chassis at the non-steer end.
Index
No. Description
1 Check valve ....................................... FA ......... Divider bypass circuit ........................ 30-35 ft-lbs / 41-47 Nm
2 Check valve ....................................... FB ......... Divider bypass circuit ........................ 30-35 ft-lbs / 41-47 Nm
3 Flow divider/combiner valve .............. FC ......... Controls flow to drive motors in
4 Orifice, 0.079 in / 2.01 mm ................ FD ......... Drive circuit
5 Orifice, 0.079 in / 2.01 mm ................ FE ......... Drive circuit
6 Relief valve, 300 psi / 20.6 bar .......... FF ......... Charge pressure circuit ..................... 20-25 ft-lbs / 27-34 Nm
7 Diagnostic nipple ............................... FG ........ Testing
8 Shuttle valve, 3 position 3 way .......... FH ......... Change pressure, hot oil shuttle ....... 30-35 ft-lbs / 41-47 Nm
9 Diagnostic nipple ............................... FI .......... Testing
4 - 52
Schematic
Item Function
forward and reverse ............................................120-133 Nm
Genie Z-60/34
November 2003
REV A
Torque
90-100 ft-lbs /
Part No. 75861