Cfm Mipccm Table; Cfm Loopback Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
Unit
From Port / To Port
State
Click the Apply button to accept the changes made.

CFM MIPCCM Table

This window is used to display CFM MIPCCM information.
To view this window, click OAM > CFM > CFM MIPCCM Table, as shown below:

CFM Loopback Settings

This window is used to CFM loopback settings.
To view this window, click OAM > CFM > CFM Loopback Settings, as shown below:
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID (1-8191)
Description
Select the switch unit to configure.
Use the drop-down menu to select a range of ports used for this configuration.
Use the drop-down menu to enable or disable the state of specific port regarding the
CFM configuration.
Figure 11-13 CFM MIPCCM Table window
Figure 11-14 CFM Loopback Settings window
Description
Select and enter the Maintenance End Point name used.
Select and enter the Maintenance End Point ID used.
545