Pfc Port Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Packet Colour
Min Threshold (0-100)
Max Threshold (0-100)
Max Drop Rate (0-100)
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.

PFC Port Settings

On this page, users can view and configure the Priority Flow Control (PFC) settings on the Switch.
NOTE: The Priority Flow Control (PFC) feature can only be enabled and used on the 10G ports.
To view the following window, click QoS > PFC Port Settings, as show below:
Select the packet color, Green, yellow or red, to be dropped.
Enter the minimum threshold value to start WRED dropping.
Enter the maximum threshold value over which WRED will drop all packets destined
for this queue.
Enter the maximum drop rate value.
360