D-Link xStack DGS-3620 Series Reference Manual page 288

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Edit button to re-configure the specific entry.
Click the Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Hello Interval (0-18000)
Triggered Hello
Interval (0-60)
Join/Prune Interval
(0-18000)
Designated Router
Priority (0-4294967294)
Propagation Delay (0-
32)
Figure 6-118 PIM for IPv6 Interface Settings – Edit window
Description
Enter the time between issuing hello packets to find neighboring routers.
Enter the maximum time before the router sends a triggered PIM Hello message on
the specified interface. A value of zero has no special meaning and indicates that
triggered PIM for IPv6 Hello message should always be sent immediately.
Enter the frequency at which this router sends PIM for IPv6 Join/Prune messages on
this PIM for IPv6 interface. A value of zero represents an 'infinite' interval, and
indicates that periodic PIM for IPv6 Join/Prune messages should not be sent on this
interface.
Enter the Designated Router Priority value inserted into the DR Priority option in PIM
for IPv6 Hello message transmitted on this interface. Numerically higher values for
this parameter indicate higher priorities.
Enter the expected propagation delay between the PIM for IPv6 routers on this
network or link.
287