Ptp Port Settings; Ptp Boundary Clock Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

PTP Port Settings

This window is used to configure the per port state of the PTP clock.
To view this window, click L2 Features > PTP > PTP Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
State
Click the Apply button to accept the changes made.

PTP Boundary Clock Settings

This window is used to configure the PTP boundary clock attributes and requires at least one parameter to execute.
To view this window, click L2 Features > PTP > PTP Boundary Clock Settings, as shown below:
Figure 5-133 PTP Port Settings window
Description
Select the switch unit to configure.
Select the port range to use for this configuration.
Use the drop-down menu to enable or disable the PTP clock state on the specified
ports.
199