Authenticator State; Authenticator Statistics - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
VLAN Name Enter the pre-configured VLAN name to create as an 802.1X guest VLAN.
Unit
Select the switch unit to configure.
Port Set the ports to be enabled for the 802.1X guest VLAN. Click the All button to select all the
ports.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry based on the information entered.

Authenticator State

This window is used to display the authenticator state.
This window appears when the Authentication State is enabled in 802.1X Global Settings window.
To view this window, click Security > 802.1X > Authenticator State as shown below:
The fields that can be configured are described below:
Parameter
Unit
Port
Click the Find button to locate a specific entry based on the information entered.
Click the Refresh button to refresh the display table so that new entries will appear.

Authenticator Statistics

This window is used to display the authenticator statistics information.
This window appears when the Authentication State is enabled in 802.1X Global Settings window.
To view this window, click Security > 802.1X > Authenticator Statistics as shown below:
Figure 9-14 Authenticator State Window
Description
Select a unit you want to display.
Use the drop-down menu to select a port to display.
425