Arp & Fdb Table - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Unit
Port
VLAN Name
VID List
MAC Address
Security
Click the Find button to locate a specific entry based on the information entered.
Click the Clear Dynamic Entries button to delete all dynamic entries of the address table based on the VLAN
name or port.
Click the View All Entries button to display all the existing entries.
Click the Clear All Entries button to remove all the dynamic entries listed in the table.
Click the Add to Static MAC table button to add the specific entry to the Static MAC table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP & FDB Table
On this page the user can find the ARP and FDB table parameters.
To view the following window, click L2 Features > FDB > ARP & FDB Table, as show below:
The fields that can be configured are described below:
Parameter
Unit
Port
MAC Address
IP Address
Click the Find by Port button to locate a specific entry based on the port number selected.
Click the Find by MAC button to locate a specific entry based on the MAC address entered.
Click the Find by IP Address button to locate a specific entry based on the IP address entered.
Click the View All Entries button to display all the existing entries.
Click the Add to IP MAC Port Binding Table to add the specific entry to the IMPB Entry Settings window.
Select the unit you want to configure.
The port to which the MAC address below corresponds.
Enter a VLAN Name for the forwarding table to be browsed by.
Enter a list of VLAN for the forwarding table to be browsed by.
Enter a MAC address for the forwarding table to be browsed by.
Tick the check box to diaplsy the FDB entries that are created by the security
module.
Figure 5-57 ARP & FDB Table window
Description
Select the unit you wish to configure.
Select the port number to use for this configuration.
Enter the MAC address to use for this configuration.
Enter the IP address the use for this configuration.
144