Dhcp Server Manual Binding; Dhcp Server Dynamic Binding - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Figure 10-18 DHCP Server Option Profile Settings window (View Details)
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.

DHCP Server Manual Binding

An address binding is a mapping between the IP address and MAC address of a client. The IP address of a client
can be assigned manually by an administrator or assigned automatically from a pool by a DHCP server. The
dynamic binding entry will be created when an IP address is assigned to the client from the pool network's address.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Manual Binding as
shown below:
The fields that can be configured are described below:
Parameter
Pool Name
IP Address
Hardware Address
Type
Click the Add button to add a new entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Delete button to remove the specific entry.

DHCP Server Dynamic Binding

This window is used to delete the DHCP server dynamic binding table.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Dynamic Binding as
shown below:
Figure 10-19 DHCP Server Manual Binding window
Description
Enter the DHCP Server Pool name.
IP address which will be assigned to specified client.
Enter the hardware address.
Either Ethernet or IEEE802 can be specified.
516