Dns Relay Static Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
DNS Relay State
Primary Name Server
Secondary Name Server
DNS Relay Cache State
DNS Relay Static Table
State
Click the Apply button to accept the changes made.

DNS Relay Static Settings

This window is used to add or delete static entries into the switch's DNS resolution table.
To view this window, click Network Application > DNS > DNS Relay > DNS Relay Static Settings as shown
below:
The fields that can be configured are described below:
Parameter
Domain Name
IP Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
Figure 10-33 DNS Relay Global Settings window
Description
Use the drop-down menu to enable or disable the DNS relay state.
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
Use the drop-down menu to enable or disable the DNS relay cache state.
Use the drop-down menu to enable or disable the DNS relay static table state.
Figure 10-34 DNS Relay Static Settings window
Description
Enter the domain name.
Enter the DNS Relay IP Address.
525