Ethernet Oam Event Log - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
From Port / To Port
Link Event
Link Monitor
Threshold
Window
Notify
Click the Apply button to accept the changes made for each individual section.

Ethernet OAM Event Log

The window is used to show ports Ethernet OAM event log information.
To view this window, click OAM > Ethernet OAM > Ethernet OAM Event Log, as shown below:
The fields that can be configured are described below:
Parameter
Port
Port List
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information entered in the fields.
Figure 11-20 Ethernet OAM Configuration Settings window
Description
Select a range of ports you wish to configure.
Use the drop-down menu to select the link events, Link Monitor or Critical Link Event.
Use the drop-down menu to select link monitor. Available options are Error Symbol,
Error Frame, Error Frame Period, and Error Frame Seconds.
Enter the number of error frame or symbol in the period is required to be equal to or
greater than in order for the event to be generated.
Enter the period of error frame or symbol in milliseconds summary event.
Select to enable or disable the notify option.
Figure 11-21 Ethernet OAM Event Log window
Description
Use the drop-down menu to select the unit and port number to view.
Enter a list of ports. Tick the All Ports check box to select all ports.
551