Dhcpv6 Server - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Pool Name
Click the Clear button to clear all the information entered in the fields.
Click the Clear All button to remove all the entries listed in the table.
DHCP Conflict IP
The DHCP server will use PING packet to determine whether an IP address is conflict with other host before
binding this IP. The IP address which has been identified conflict will be moved to the conflict IP database. The
system will not attempt to bind the IP address in the conflict IP database unless the user clears it from the conflict
IP database.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Conflict IP as shown below:
Click the Clear All button to remove all the entries listed in the table.

DHCPv6 Server

DHCPv6 Server Global Settings
This command is used to enable the DHCPv6 server function on the Switch
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Global Settings
as shown below:
The fields that can be configured are described below:
Parameter
DHCPv6 Server Global
Figure 10-20 DHCP Server Dynamic Binding window
Description
Enter the DHCP Server Pool name.
Figure 10-21 DHCP Conflict IP window
Figure 10-22 DHCPv6 Server Global Settings window
Description
Click the radio buttons to enable or disable the DHCPv6 Server State.
517