D-Link xStack DGS-3620 Series Reference Manual page 331

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Prefix List Name
Type
Prefix Address
IPv6 Prefix
Address
Click the first Clear button to reset the prefix counter based on the information entered.
Click the second Clear button to reset all the prefixes counters based on the Type selected.
Click the <<Back button to return to the previous window.
After creating an IPv4 entry, click the
The fields that can be configured are described below:
Parameter
Sequence ID (1-
65535)
Direction
Prefix Address
GE (1-32)
Figure 6-182 IP Prefix List Settings - Clear Counter window
Description
Enter the name of the prefix list that will be cleared.
Select the IP prefix list type that will be cleared here. Options to choose from are IPv4 and
IPv6.
After selecting IPv4 as the Type, the following parameter will be available. Enter the IPv4
prefix address to be cleared here.
After selecting IPv6 as the Type, the following parameter will be available. Enter the IPv6
prefix address to be cleared here.
View Detail
Figure 6-183 IP Prefix List Settings - View Detail (IPv4) window
Description
Enter the sequence number for the rule entry.
Use the drop-down menu to Permit or Deny the specified network.
Enter the IPv4 network address followed by the prefix length.
Enter the minimum prefix length to be matched.
link to see the following window.
330