Ospf Area Aggregation Settings; Ospf Host Route Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Password
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.

OSPF Area Aggregation Settings

This window is used to configure the OSPF area aggregation settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Area Aggregation Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Area ID
IP Address
Network Mask
LSDB Type
Advertise
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.

OSPF Host Route Settings

This window is used to configure OSPF host route settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Host Route Settings, as shown
below:
When Simple is selected in the Authentication drop-down menu, enter a simple text
password.
Figure 6-50 OSPF Area Aggregation Settings window
Description
Enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF domain.
Enter the IP address that uniquely identifies the network that corresponds to the OSPF
Area.
Enter the network mask that uniquely identifies the network that corresponds to the OSPF
Area.
Use the drop-down menu to select the type of address aggregation. Options to choose
from are NSSA Ext and Summary.
Use the drop-down menu to enable or disable the advertisement trigger.
247