Table of Contents
Advertisement
®
xStack
The fields that can be configured are described below:
Parameter
From Port / To Port
State
Click the Apply button to accept the changes made.
CFM MIPCCM Table
On this page the user can view MIP CCM database entries.
To view the following window, click OAM > CFM > CFM MIPCCM Table, as shown below:
CFM Loopback Settings
On this page the user can configure the CFM loopback parameters.
To view the following window, click OAM > CFM > CFM Loopback Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 11-11 CFM Port Settings window
Description
Here the user can select the port range used for this configuration.
Here the user can enable or disable the state of specific port regarding the CFM
configuration.
Figure 11-12 CFM MIPCCM Table window
387
Advertisement
Table of Contents
