Wac Port Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Confirm Password
Click the Apply button to accept the changes made.
Click the Delete All button to remove all the entries listed.
Click the Edit VLAN Name button to re-configure the specific entry's VLAN Name.
Click the Edit VID button to re-configure the specific entry's VLAN ID.
Click the Clear VLAN button to remove the VLAN information from the specific entry.
Click the Delete button to remove the specific entry.

WAC Port Settings

Users can view and set port configurations for Web authentication.
To view this window, click Security > Web-based Access Control (WAC) > WAC Port Settings as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Aging Time (1-1440)
administrators who have selected Local as their Web-based authenticator.
Retype the password entered in the previous field.
Figure 9-40 WAC Port Settings window
Description
Select the switch unit to configure.
Use the drop-down menus to select a range of ports to be enabled as WAC ports.
This parameter specifies the time period during which an authenticated host will remain
in the authenticated state. Enter a value between 1and 1440 minutes. Tick the Infinite
452