D-Link xStack DGS-3620 Series Reference Manual page 107

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
PVID (1-4094)
GVRP
Ingress Checking
Acceptable Frame Type
Click the Apply button to accept the changes made.
Figure 5-12 GVRP Port Settings window
Description
Select the unit you want to configure.
Select the starting and ending ports to use.
This field is used to manually assign a PVID to a VLAN. The Switch's default is to
assign all ports to the default VLAN with a VID of 1.The PVID is used by the port to
tag internally outgoing, untagged packets, and to make filtering decisions about
incoming packets.
The GARP VLAN Registration Protocol (GVRP) enables the port to dynamically
become a member of a VLAN. GVRP is Disabled by default.
This drop-down menu allows the user to enable the port to compare the VID tag of
an incoming packet with the port's VLAN setting, including PVID and tag LAN
settings. If enable ingress checking and the reception port is not the member port of
the frame's VLAN, the frame shall be discarded.
This field denotes the type of frame that will be accepted by the port. The user may
choose between Tagged Only, which means only VLAN tagged frames will be
accepted, and All, which mean both tagged and untagged frames will be accepted.
All is enabled by default.
106