D-Link xStack DGS-3620 Series Reference Manual page 324

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The static fields that can be configured are described below:
Parameter
Type
Address Family
Regexp
The dynamic fields that can be configured are described below:
Parameter
Regexp
Click the Find button to locate a specific entry based on the information entered.
After selecting the Filter List option as the Type, the following options will be available.
The dynamic fields that can be configured are described below:
Parameter
Filter List Name
Click the Find button to locate a specific entry based on the information entered.
Figure 6-169 BGP Routing Table (Regexp) window
Description
Select the BGP routing type of information to display. Options to choose from are Regexp,
Filter List, Route Map, Prefix List, CIDR Only, Inconsistent AS, Community, Community
List, Address, and Network. The parameters in the lower section changes based on the
selected type.
Select the address family that will be displayed here. Options to choose from are IPv4
Unicast and IPv6 Unicast.
Enter the regular expression that defines the AS path filter.
Description
Enter the regular expression that defines the AS path filter.
Figure 6-170 BGP Routing Table (Filter List) window
Description
Enter the filter list name that was previously created in BGP AS Path Access Settings
window. This is used to display routes conforming to the filter list.
323