D-Link xStack DGS-3620 Series Reference Manual page 311

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Neighbor Address
Peer Group Name
Address Family
Prefix Warning Threshold
(1-100)
Prefix Max Count (1-12000)
Prefix Warning Only
Click the Apply button to accept the changes made.
BGP Neighbor General Settings
This window is used to configure BGP neighbor general settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor General Settings, as
shown below:
Figure 6-152 BGP Neighbor Maximum Prefix Settings window
Description
Click the radio button and use the drop-down menu to select the address of the
BGP speaking neighbor.
Click the radio button and use the drop-down menu to select the name of the
BGP peer group.
Select the unicast address family that will be configured here. Options to choose
from are IPv4 Unicast and IPv6 Unicast.
Enter the percentage the maximum prefix limit on the router starts to generate a
warning message. The range is from 1 to 100.
Enter the maximum number of prefixes allowed from the specified neighbor.
Use the drop-down menu to enable or disable prefix warning only. This allows
the router to generate a log message when the maximum prefix limit is
exceeded, instead of terminating the peering session.
310