Static Multicast Route Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
Protocol
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear the counter information in the display section.
Click the View All button to display all the existing entries.

Static Multicast Route Settings

This window is used to create a static multicast route. When a static multicast route entry is created, if the source
IP address of the received IP multicast packet matches this static multicast route entry, the entry will be used to
RPF check.
To view the following window, click L3 Features > Static Multicast Route Settings, as shown below:
Figure 6-14 IP Multicast Statistics Counter Table window
Description
Enter the interface name here. This can be up to 12 characters long.
Use the drop-down menu to select the protocol. Options to choose from are None,
IGMP, DVMRP, and PIM.
213