®
xStack
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
TCP Port (1-65535)
User Name
Password
Source File
Destination File
Click the Upload button to initiate the upload.
Upload Firmware to RCP
This window allows the user to upload firmware from the Switch to an RCP Server.
The fields that can be configured are described below:
Parameter
Unit
RCP Server IP
User Name
Source File
Destination File
Click the Upload button to initiate the upload.
Upload Firmware to HTTP
This window allows the user to upload firmware from the Switch to a HTTP Server.
The fields that can be configured are described below:
enter the IPv4 address of the FTP server. Selecting the IPv6 option will require the user
to enter the IPv6 address of the FTP server.
Enter the TCP port number used here.
Enter the FTP client's user name here.
Enter the FTP client's password here.
Enter the source file's path and filename here.
Enter the destination file's path and filename here.
Figure 13-11 Upload Firmware to RCP window
Description
Select the switch unit that will be used for this configuration here.
Enter the RCP Server IP Address used.
Enter the appropriate Username used.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
Figure 13-12 Upload Firmware to HTTP window
591