D-Link xStack DGS-3620 Series Reference Manual page 627

Layer 3 managed stackable gigabit switch
Hide thumbs Also See for xStack DGS-3620 Series:
Table of Contents

Advertisement

®
xStack
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
pimInterfaceElection
LLDP-MED
lldpRemTablesChange
lldpXMedTopologyCha
ngeDetected
802.3ah OAM
dot3OamThresholdEvent
dot3OamNonThresholdEvent
Upload/Download
agentFirmwareUpgrade
agentCfgOperCompleteTrap
Gratuitous ARP
agentGratuitousARPTrap
incremented, subject to the rate limit specified
by pimRPMappingChangeNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimGroupMappingPrecedence
A pimInterfaceElection notification signifies that
a new DR or DF has been elected on a network.
This notification is generated whenever the
counter pimInterfaceElectionWinCount is
incremented, subject to the rate limit specified
by pimInterfaceElectionNotificationPeriod.
Binding objects:
(1) pimInterfaceAddressType
(2) pimInterfaceAddress
A lldpRemTablesChange notification is sent
when
the value of
lldpStatsRemTableLastChangeTime
changes.
Binding objects:
(1) lldpStatsRemTablesInserts
(2) lldpStatsRemTablesDeletes
(3) lldpStatsRemTablesDrops
(4) lldpStatsRemTablesAgeouts
A notification generated by the local device
sensing
a change in the topology that indicates that a
new
remote device attached to a local port, or a
remote
device disconnected or moved from one port to
another.
Binding objects:
(1) lldpRemChassisIdSubtype
(2) lldpRemChassisId
(3) lldpXMedRemDeviceClass
This notification is sent when a local or remote
threshold crossing event is detected.
Binding objects:
(1) dot3OamEventLogTimestamp
(2) dot3OamEventLogOui
(3)dot3OamEventLogType
(4)dot3OamEventLogLocation
(5)dot3OamEventLogWindowHi
(6)dot3OamEventLogWindowLo
(7)dot3OamEventLogThresholdHi
(8)dot3OamEventLogThresholdLo
(9)dot3OamEventLogValue
(10)dot3OamEventLogRunningTotal
(11)dot3OamEventLogEventTotal
This notification is sent when a local or remote
non-threshold crossing event is detected.
Binding objects:
(1) dot3OamEventLogTimestamp
(2) dot3OamEventLogOui
(3) dot3OamEventLogType
(4)dot3OamEventLogLocation
(5)dot3OamEventLogEventTotal
This trap is sent when the process of upgrading
the firmware via SNMP has finished.
Binding objects:
(1) swMultiImageVersion
The trap is sent when the configuration is
completely saved, uploaded or downloaded
Binding objects:
unitID
agentCfgOperate
agentLoginUserName
The trap is sent when IP address conflicted.
Binding objects:
(1) ipaddr
626
1.3.6.1.2.1.157.0.5
1.0.8802.1.1.2.0.0.1
1.0.8808.1.1.2.1.5.4795.0.
1
1.3.6.1.2.1.158.0.1
1.3.6.1.2.1.158.0.2
1.3.6.1.4.1.171.12.1.7.2.0.
7
1.3.6.1.4.1.171.12.1.7.2.0.
9
1.3.6.1.4.1.171.12.1.7.2.0.
5

Advertisement

Table of Contents
loading

Table of Contents