D-Link xStack DGS-3620 Series Reference Manual page 523

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
DHCPv6 Relay State
DHCPv6 Server
Address
Click the Apply button to accept the changes made.
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
DHCPv6 Relay Option 37 Settings
This window is used to configure the processing of Option 37 for the DHCPv6 relay function. When the DHCPv6
relay Option 37 is enabled, the DHCP packet will be inserted with the Option 37 field before being relayed to server.
The DHCP packet will be processed based on the behavior defined in the check and remote ID type setting. When
the state is disabled, the DHCP packet will be relayed directly to server without further checks and inserted with the
Option 37.
To view this window, click Network Application > DHCP > DHCPv6 Relay > DHCPv6 Relay Option 37 Settings
as shown below:
The fields that can be configured are described below:
Parameter
State
Figure 10-30 DHCPv6 Relay Settings window
Description
Enter the name of the IPv6 interface. Tick the All check box to select all IPv6
interfaces.
Use the drop-down menu to enable or disable the DHCPv6 relay state of the interface.
Enter the DHCPv6 server IPv6 address.
Figure 10-31 DHCPv6 Relay Option 37 Settings window
Description
Select the DHCPv6 relay Option 37 state.
Enabled - When the state is enabled, the DHCP packet will be inserted with the Option
522