D-Link xStack DGS-3620 Series Reference Manual page 413

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Add Rule button to create a new ACL rule in this profile.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following page will appear:
The fields that can be configured are described below:
Parameter
Access ID (1-128)
Class
Mirror
Action
Priority (0-7)
Figure 8-62 Add Egress Access Rule (IPv6 ACL) window
Description
Type in a unique identifier number for this access. This value can be set from 1 to 128.
Auto Assign – Tick the check box will instruct the Switch to automatically assign an
Access ID for the rule being created.
Specify the value of IPv6 class.
Tick this option to specify that packets matching the access rule are copied to the
mirror port in the mirror group.
Select Permit to specify that the packets that match the access profile are forwarded
by the Switch, according to any additional rule added (see below).
Select Deny to specify that packets that match the access profile are not forwarded by
the Switch and will be filtered.
Tick the corresponding check box to re-write the 802.1p default priority of a packet to
the value entered in the Priority field, which meets the criteria specified previously in
412