D-Link xStack DGS-3620 Series Reference Manual page 256

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Instance ID (0-255)
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
OSPFv3 Area Aggregation Settings
This window is used to configure the OSPFv3 area aggregation settings.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Area Aggregation Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Area ID
IPv6 Address/Prefix
Length
Advertise
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.
OSPFv3 LSDB Table
This window is used to display the OSPFv3 Link State Database (LSDB).
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 LSDB Table, as shown below:
The fields that can be configured are described below:
Enter the instance ID of the interface. The default value is 0.
Figure 6-64 OSPFv3 Area Aggregation Settings window
Description
Enter a 32-bit number in the form of an IPv4 address that uniquely identifies the
OSPFv3 area in the OSPFv3 domain.
Enter the IPv6 network address of the aggregation.
Use the drop-down menu to specify whether the OSPFv3 ABR will use this
aggregation to aggregate the intra-area routes or not.
Figure 6-65 OSPFv3 LSDB Table window
255