D-Link xStack DGS-3620 Series Reference Manual page 613

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
ipaddr >).
Parameters description:
num: The number of prefix received.
limit: Max number of prefix allowed to receive.
ipaddr: IP address of BGP peer.
Event description: The total bgp prefix number received exceeds the limit.
Log Message: [BGP(9):] The total number of prefix received reaches max prefix limit.
Event description: BGP received unnecessary AS4-PATH attribute from new (4-bytes AS)
BGP peer
Log Message: [BGP(10):] Received AS4-PATH attribute from new (4-bytes AS) peer. (Peer
<ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Event description: BGP received unnecessary AS4-AGGREGATOR attribute from new (4-
bytes AS) BGP peer
Log Message: [BGP(11):] Received AS4-AGGREGATOR attribute from new (4-bytes AS)
peer. (Peer <ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Event description: BGP received AS_CONFED_SEQUENCE or AS_CONFED_SET path
segment type in AS4-PATH attribute.
Log Message: [BGP(12):] Received AS_CONFED_SEQUENCE or AS_CONFED_SET path
segment type in AS4-PATH attribute. (Peer <ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Event description: BGP received invalid AS4-PATH attribute.
Log Message: [BGP(13):] Received invalid AS4-PATH attribute. Value : <STRING> (Peer
<ipaddr>).
Parameters description:
STRING: Detailed description about the invalid attribute.
ipaddr: IP address of BGP peer.
Event description: BGP received invalid AS4- AGGREGATOR attribute.
Log Message: [BGP(14):] Received invalid AS4- AGGREGATOR attribute. Value :
<STRING> (Peer <ipaddr>).
Parameters description:
STRING: Detailed description about the invalid attribute.
ipaddr: IP address of BGP peer.
Stacking Event description: Hot insertion.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot insertion.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Event description: Hot removal.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot removal.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Event description: Stacking topology change.
Log Message: Stacking topology is <Stack_TP_TYPE>. Master(Unit <unitID>,
MAC:<macaddr>).
Parameters description:
Stack_TP_TYPE: The stacking topology type is one of the following:
1. Ring,
2. Chain.
unitID: Box ID.
Macaddr: MAC address.
Event description: Backup master changed to master.
Log Message: Backup master changed to master. Master (Unit: <unitID>).
Parameters description:
unitID: Box ID.
Event description: Slave changed to master
Log Message: Slave changed to master. Master (Unit: <unitID>).
Parameters description:
unitID: Box ID.
Event description: Box ID conflict.
Log Message: Hot insert failed, box ID conflict: Unit <unitID> conflict (MAC: <macaddr> and
MAC: <macaddr>).
Parameters description:
unitID: Box ID.
macaddr: The MAC addresses of the conflicting boxes.
612
Information
Warning
Warning
Warning
Warning
Warning
Informational
Informational
Informational
Informational
Informational
Critical