Lldp Management Address List - D-Link xStack DGS-3620 Series Reference Manual

Layer 3 managed stackable gigabit switch
Hide thumbs Also See for xStack DGS-3620 Series:
Table of Contents

Advertisement

®
xStack
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Notification
Admin Status
Subtype
Action
Address
Port ID Subtype
Click the Apply button to accept the changes made.
NOTE: The IPv4 or IPv6 address entered here should be an existing LLDP management IP address.

LLDP Management Address List

On this page the user can view the LLDP management address list.
To view the following window, click L2 Features > LLDP > LLDP> LLDP management Address List, as shown
below:
The fields that can be configured are described below:
Parameter
IPv4/IPv6
Address
Description
Select the switch unit to configure.
Use the drop-down menu to select the starting and ending ports to use.
Use the drop-down menu to enable or disable the status of the LLDP notification. This
function controls the SNMP trap however it cannot implement traps on SNMP when the
notification is disabled.
This function controls the local LLDP agent and allows it to send and receive LLDP
frames on the ports. This option contains TX, RX, TX And RX or Disabled.
TX - the local LLDP agent can only transmit LLDP frames.
RX - the local LLDP agent can only receive LLDP frames.
TX And RX - the local LLDP agent can both transmit and receive LLDP frames.
Disabled - the local LLDP agent can neither transmit nor receive LLDP frames.
The default value is TX And RX.
Use the drop-down menu to select the type of the IP address information will be sent.
Use the drop-down menu to enable or disable the action field.
Enter the IP address that will be sent.
Specifies the subtype of the port ID TLV. Selecting Local specifies the subtype of the
port ID TLV using the local port number. Selecing MAC Address specifies the subtype
of the port ID TLV using the MAC address.
Figure 5-113 LLDP Management Address List window
Description
Use the drop-down menu to select either IPv4 or IPv6.
Enter the management IP address or the IP address of the entity you wish to advertise
185

Advertisement

Table of Contents
loading

Table of Contents