Download Firmware From Http; Upload Firmware; Upload Firmware To Tftp - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
Unit
RCP Server IP
Source File
User Name
Destination File
Boot Up
Click the Download button to initiate the download.

Download Firmware from HTTP

This window allows the user to download firmware from a computer to the Switch and updates the switch.
The fields that can be configured are described below:
Parameter
Unit
Source File
Destination File
Boot Up
Click the Download button to initiate the download.

Upload Firmware

The following window is used to upload firmware from the Switch.

Upload Firmware to TFTP

This window allows the user to upload firmware from the Switch to a TFTP Server.
Description
Select the switch unit that will be used for this configuration here.
Enter the RCP server IP address used.
Enter the location and name of the Source File.
Enter the remote user name on the RCP server.
Enter the location and name of the Destination File.
Tick the check box to set it as a boot up file.
Figure 13-8 Download Firmware from HTTP window
Description
Select the switch unit that will be used for this configuration here.
Enter the location and name of the Source File or click the Browse button to navigate
to the firmware file for the download.
Enter the location and name of the Destination File.
Tick the check box to set it as a boot up file.
589