Bgp Summary Table; Bgp Routing Table - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Mode Option
Click the Apply button to accept the changes made for each individual section.

BGP Summary Table

This window displays the BGP summary information.
To view the following window, click L3 Features > BGP > BGP Summary Table, as shown below:
The fields that can be selected are described below:
Parameter
Address Family
Click the Find button to display information based on the selection made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

BGP Routing Table

On this page, users can view information that will be displayed in the BGP routing table. The Type field is a
dynamic parameter that will change the page depending on the selection made.
To view the following window, click L3 Features > BGP > BGP Routing Table, as shown below:
After selecting the Regexp option as the Type, the following options will be available.
Tick the desired mode option: Soft, In, Prefix Filter or Out.
Soft – This initiates a soft reset. It does not tear down the session.
In – This iInitiates inbound reconfiguration. If neither in nor out keywords are specified,
both inbound and outbound sessions are reset.
Prefix Filter – The local site configured prefix filter will be notified to the remote
neighbor when inbound soft reset is applied.
Out – This initiates outbound reconfiguration.
Figure 6-168 BGP Summary Table window
Description
Select the address family that will be displayed here. Options to choose from are IPv4
Unicast and IPv6 Unicast.
322