D-Link xStack DGS-3620 Series Reference Manual page 61

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
IPv4 Address
Subnet Mask
VLAN Name
Interface Admin State
Secondary Interface
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv4 Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Figure 4-9 IPv4 Interface Settings window
Description
Enter the name of the IP interface being created.
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable the Interface Admin State.
Tick the check box to use this Interface as a Secondary Interface.
Figure 4-10 IPv4 Interface Settings – Edit window
Description
60