Cfm Mipccm Table; Cfm Loopback Settings - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
State
Click the Apply button to accept the changes made.

CFM MIPCCM Table

This window is used to display CFM MIPCCM information.
To view this window, click OAM > CFM > CFM MIPCCM Table, as shown below:

CFM Loopback Settings

This window is used to CFM loopback settings.
To view this window, click OAM > CFM > CFM Loopback Settings, as shown below:
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID (1-8191)
MD Name
MD Index
MA Name
Description
Specifies the unit's ID used.
Use the drop-down menu to select a range of ports used for this configuration.
Use the drop-down menu to enable or disable the state of specific port regarding the
CFM configuration.
Figure 10-11 CFM MIPCCM Table Window
Figure 10-12 CFM Loopback Settings Window
Description
Select and enter the Maintenance End Point name used.
Select and enter the Maintenance End Point ID used.
Select and enter the Maintenance Domain name used.
Select and enter the Maintenance Domain index used.
Select and enter the Maintenance Association name used.
419