Mirror; Port Mirror Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Find button to display information based on the selection made.
Click the View All button to display all information.
Click the Clear All button to clear all the information in the table.

Mirror

The Switch allows you to copy frames transmitted and received on a port and redirect the copies to another port.
You can attach a monitoring device to the mirroring port, such as a sniffer or an RMON probe, to view details about
the packets passing through the first port. This is useful for network monitoring and troubleshooting purposes.

Port Mirror Settings

To view this window, click Monitoring > Mirror > Port Mirror Settings as shown below:
OSPFv3 - Select to display packet type OSPFv3. (EI Mode Only)
RIP - Select to display packet type RIP.
RIPng - Select to display packet type RIPng. (EI Mode Only)
BGP - Select to display packet type BGP. (EI Mode Only)
VRRP - Select to display packet type VRRP.
IGMP - Select to display packet type IGMP.
MLD - Select to display packet type MLD.
PIM-IPv4 - Select to display packet type PIM-IPv4.
PIM-IPv6 - Select to display packet type PIM-IPv6. (EI Mode Only)
DVMRP - Select to display packet type DVMRP. (EI Mode Only)
Reserved_IPv4_IPMC - Select to display packet type reserved IPv4 IPMC.
Reserved_IPv6_IPMC - Select to display packet type reserved IPv6 IPMC.
Unknown_IPv4_IPMC - Select to display packet type unknown IPv4 IPMC.
Unknown_IPv6_IPMC - Select to display packet type unknown IPv6 IPMC.
ARP - Select to display packet type ARP.
ICMP - Select to display packet type ICMP.
NDP - Select to display packet type NDP.
ICMPv6 - Select to display packet type ICMPv6.
SNTP - Select to display packet type SNTP.
DNS - Select to display packet type DNS.
TFTP - Select to display packet type TFTP.
RCP - Select to display packet type RCP.
Telnet - Select to display packet type TELNET.
DHCP - Select to display packet type DHCP.
DHCPv6 - Select to display packet type DHCPv6.
UDP-Helper - Select to display packet type UDP-Helper.
572