Jwac User Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.

JWAC User Settings

This window is used to configure a JWAC user of the switch's local database.
To view this window, click Security > Japanese Web-based Access Control (JWAC) > JWAC User Settings as
shown below:
The fields that can be configured are described below:
Parameter
User Name
Password
Confirm Password
VID(1-4094)
Click the Add button to add a new entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
NOTE: The Username and Password values should be less than 16 characters.
unauthenticated state. The default value is Infinite. To change this value, un-tick the
Infinite check box and enter a value between 1 and 1440 minute(s). Tick the Infinite
check box to indicate the Idle state of the authenticated host on the port will never be
checked.
Figure 9-45 JWAC User Settings window
Description
Enter a username of up to 15 alphanumeric characters.
Enter the password the administrator has chosen for the selected user. This field is
case-sensitive and must be a complete alphanumeric string.
Retype the password entered in the previous field.
Enter a VLAN ID number between 1 and 4094.
458