Cfm Port Settings; Cfm Mipccm Table; Cfm Loopback Settings - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide

CFM Port Settings

This window is used to enable or disable the CFM function on a per-port basis.
To view this window, click OAM > CFM > CFM Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
State
Click the Apply button to accept the changes made.

CFM MIPCCM Table

This window is used to show the MIP CCM database entries.
To view this window, click OAM > CFM > CFM MIPCCM Table, as shown below:

CFM Loopback Settings

This window is used to start a CFM loopback test.
To view this window, click OAM > CFM > CFM Loopback Settings, as shown below:
Figure 13-10 CFM Port Settings Window
Description
Use the drop-down menus to select a range of ports to be configuration.
Use the drop-down menu to enable or disable the state of specific port regarding the
CFM configuration.
Figure 13-11 CFM MIPCCM Table Window
282