Bgp Peer Group Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

BGP Peer Group Settings

This window is used to create or delete a Border Gateway Protocol (BGP) neighbor.
To view the following window, click L3 Features > BGP > BGP Peer Group Settings, as shown below:
The fields that can be configured are described below:
Parameter
Peer Group Name
Action
Neighbor Address
Remote AS Number
(0-4294967295)
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
Figure 6-146 BGP Peer Group Settings window
Description
Select or enter the name of the BGP peer group.
Choose among None, Add, or Delete. None is the default.
Select an existing neighbor address here.
Enter the number of the autonomous system to which the peer group belongs to.
306